Show simple item record

dc.contributor.advisorHumphries, Robert
dc.contributor.advisorDodd, Matt
dc.contributor.advisorLing, Chris
dc.contributor.authorRutgers, Gordon W. P.
dc.date.accessioned2013-10-28T22:36:21Z
dc.date.available2013-10-28T22:36:21Z
dc.date.issued2013-10-28
dc.date.submitted2013
dc.identifier.urihttp://hdl.handle.net/10170/653
dc.description.abstractA flux chamber is an effective and recognized means of sampling off gassing surfaces, such as landfills and settling ponds. Because there has been little discussion on the survey patterns used for deploying flux chambers. This thesis looks into developing a scalable survey pattern as part of a flux chamber test methodology that can accurately give a representative sample of the emission components and the emission rate of the entire area of interest. The test methodology evolved out of literature review and experiences of two case studies which are discussed within this thesis.en_US
dc.subjectArea Sourcesen_US
dc.subjectEmission Samplingen_US
dc.subjectFlux Chamberen_US
dc.subjectOff-Gassingen_US
dc.subjectSettling Pondsen_US
dc.subjectTest Methodsen_US
dc.titleSmoke off the water : determination of mass emission rates from off-gassing surfacesen_US
dc.degree.nameM.Sc. in Environment and Managementen_US
dc.degree.levelMastersen_US
dc.degree.disciplineSchool of Environment and Sustainabilityen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record